Related Products

Rishabh RISH Trans Programmable Multifunction Transducer (Display, Modbus and Analog Output)

RISHABH RISH Trans Programmable Multifunction Transducer (Display, Modbus and Analog Output) 
  • It is possible to program primary of external potential Transformer (PT)
  • The secondary of external Current Transformer (CT) can be programmed on site
  • The instrument measures distorted waveform up to 15th Harmonic

Product Details

RISHABH RISH Trans Programmable Multifunction Transducer (Display, Modbus and Analog Output)

On site programmable PT/CT ratios
It is possible to program primary of external potential Transformer (PT), primary of external Current Transformer (CT) on site locally via RS232 interface or local display (optional) or remotely via MODBUS (RS485).

User selectable CT Secondary 5A/1A
The secondary of external Current Transformer (CT) can be programmed on site to either 6A to 1A locally via RS232 interface or local display (optional) or remotely via MODBUS (RS485).

User selectable PT Secondary
The secondary of external potential Transformer (PT) can be programmed on locally via RS232 interface or local display (optional) or remotely via MODBUS (RS485)

User selectable 3 phase 3W or 4W
User can program on site the network connection as either 3 Phase 3 Wire or 4 Wire locally via RS232 interface or local display (optional) or remotely via MODBUS (RS485).

True RMS measurement
The instrument measures distorted waveform up to 15th Harmonic.

High brightness 3 line 4 digits LED display (OPTIONAL)
Simultaneous display of 3 Parameters

Fast Analog output response(Less then 500ms)
Analog output responds for step input within 500ms.

Number of parameters measured: more than 28
The instrument measures more than 28 electrical parameters of Phase network.

MODBUS (RS485) Output
The MODBUS output enables the instrument to transmit all the measured parameters over standard MODBUS (RS485).

Configuration of the Instrument via MODBUS
The instrument settings can be configured locally via RS232 interface or local display (optional) or remotely via MODBUS (RS485).
Note: The MODBUS communication parameters can only be set locally via RS232 interface or local display (optional).

Analog Outputs (4 Outputs)
4 Analog outputs can be programmed from a list of input parameters.

Compliance to International Safety standards
Compliance to International Safety standard IEC 61010-1- 2001

RISHABH RISH Ducer MXX Series Programmable Multifunction Transducer The RISH Ducer MXX series of multi-transducers simultaneously measure several variables of an electric power system and...
RISHABH RISH Ducer M30 Programmable Multifunction Transducer RISH Ducer M40 is a programmable transducer with a RS 485 bus interface (MODBUS®).It supervises several variables of an electr...
ISKRA MT 560 Multifunction Transducer & Analyzer The MT 560 / UMT 560 multi transducer and analyser is used for a permanent analysis of electricity supply quality in compliance with the S...
RISHABH RISH Ducer MXX Series Programmable Multifunction Transducer The RISH Ducer MXX series of multi-transducers simultaneously measure several variables of an electric power system and...
RISHABH Con I Current / Voltage Transducer The RISH RISH CON - I is used to measure and convert AC Voltage or Current input into an proportional DC current or voltage output signal. Outpu...