Related Products

EuroSMC SMC-12 Automatic Test System For Miniature Circuit Breakers

EuroSMC SMC-12 Automatic Test System For Miniature Circuit Breakers 
  • Designed to test miniature circuit breakers (MCB's) with regards to their thermal and magnetic (Instantaneous) response
  • Programmable testing unit, RS-485, computer controlled. Records, stores, and prints all test results
  • Low current output distortion (<1%), Time measurement: up to 9999s, ±1s.

Product Details

EuroSMC SMC-12 Automatic Test System For Miniature Circuit Breakers

The SMC-12 Test system is divided by the following sections:

- Stabilized Current Supply.
- Control and Measuring Computer.
- Software controls Program. (M12TEST).

APPLICATIONS

- Designed to test miniature circuit breakers (MCB's) with regards to their thermal and magnetic (Instantaneous) response.
- Meets the IEC requirements for testing MCB's.
- Programmable testing unit, RS-485, computer controlled.
- Records, stores, and prints all test results.

CHARACTERISTICS

- Pre-selected current up to 100A in each test position.
- Can be connected in parallel to obtain higher currents.
- Low current output distortion (<1%)
- Time measurement: up to 9999s, ±1s.

EuroSMC PME-ATK Linear & Rotary Transducers and Adapters The PME-ATK is an entry set containing the necessary to perform motion analysis on virtually any circuit breaker with the PME-500-...
WEIS GMBH SA100S Switchgear Analyser Breaker Timing Test Set The SA100s Switchgear Analyser is an extremely light-weight & quick tool to check basic Circuit Breaker Timing and is an instr...
WUHAN HUAYING HYGK 307 Circuit Breaker Analyzer General introduction HYGK-307 is special instrument for power system GIS mechanical properties measuring. The instrument takes IPC for t...
WUHAN HUAYING HYGK 306 Circuit Breaker Analyzer General introduction The HYGK-306 is special instrument for power system GIS mechanical properties measuring. The instrument takes ARM7 ...
WUHAN HUAYING HYKZ IV Vacuum Degree Tester General introduction The tester use the magnetic control discharging method to test the vacuum degree of arc extinguish chamber, it’s easy op...