Related Products

High Voltage VT33 VLF Fault Locator Combination

HIGH VOLTAGE VT33 VLF Fault Locator Combination 
  • It is the worlds only combination VLF Hipot and cable fault locator or Thumper
  • It is the complete tool for AC testing and fault locating cables rated up to 25kV
  • VLF cable burn mode ans a 760 joule discharge output

Product Details

HIGH VOLTAGE VT33 VLF Fault Locator Combination

The VT33 is the worlds only combination VLF Hipot and cable fault locator or Thumper. It is the complete tool for AC testing and fault locating cables rated up to 25kV. It offers a 33 kV AC peak VLF output, VLF cable burn mode ans a 760 joule discharge output. It is fully TDR / radar ready.

VLF Test Sets from 28kV – 200kV with Sine Wave Output HVI offers the most portable, affordable, and easiest to use VLF hipots available. HVI offers the largest selection of models in the world, with ratings from 28kV – 200kV with load ratings from 0.4mF – 50mF. Since 1998, HVI has been the world's leading source for VLF test equipment. HVI is the VLF company, with nearly 1000 units shipped to over 60 countries.Patent protected under United States Patent No. 6169406.A VLF hipot is just an AC output tester but with an output frequency of 0.1 Hz or lower rather than 50/60Hz. Although the frequency is very low, it is still an alternating current with polarity reversals every half cycle. At 0.1 Hz output, rather than 60Hz, it takes 600 times less current and power to apply an AC voltage to a capacitive load, like a long cable. There is no better way to verify the AC integrity of a cable than to hipot it with AC voltage. VLF hipots are used to provide a go/no-go, or pass/fail, voltage withstand test. It can also be used as the voltage source for diagnostic cable testing. Contact HVI for more on Tan Delta and Partial Discharge measurement accessories. HVI provides the best methods of cable testing.

MEGGER PFL20M1500 Power Cable Fault Locator System The PFL20M1500 Power Fault Locator System is designed to meet power industry requirements for power cable fault location in underground ...
MEGGER TDR2000/2P Dual Channel Cable Fault Locator Specifically for the Power industry, Fused Croc-clip lead set 2m, 300V CAT III (415V Phase to Phase), Intermittent fault location, No bl...
MEGGER L1070 Portable Locators Multiple frequencies, Transmits AF or RF signals or both simultaneously, Peak and null detection, Passive 60 Hz, Measures current flow in buried conductors ...
MEGGER Suitcase Impulse Generator 240 Vac Easily portable, Compact design & Noiseless discharge technique The Suitcase Impulse Generator is a lightweight and portable fault locating se...
APLAB Model SWT 4 LV Surge Tester SWT 4 is a powerful instrument to pre-locate the fault distance and exactly locate the fault point in a short time. It offers 500J energy on 2 and 4 KV r...