Related Products

Hioki 9667 Flexible Clamp-On Sensor

HIOKI 9667 Flexible Clamp-On Sensor 
  • Lightweight, hollow-coil sensor precludes overheating even when sensing large currents
  • Even flexible enough for complicated wiring
  • Frequency characteristics : 10 Hz to 20 kHz ±3 dB (deviation from accuracy)

Product Details

HIOKI 9667 Flexible Clamp-On Sensor

For large current measurement, using with the HIOKI's instruments

Lightweight, hollow-coil sensor precludes overheating even when sensing large currents. Even flexible enough for complicated wiring.

Basic specifications

Rated input current : AC 5000 A to 500 A, AC 500 A to 50 A

Rated output current : 500mV AC f.s. (0.1mV AC/A), 500mV AC f.s. (1mV AC/A)

Amplitude accuracy : ±2.0% rdg. ±1.5mV (at 45 - 66 Hz, minimum input 10% of range)

Phase accuracy : ±1° (at 45 - 5 kHz)

Max. allowable input : Continuous 10000 A rms (at 45 - 66 Hz)

Frequency characteristics : 10 Hz to 20 kHz ±3 dB (deviation from accuracy)

Max. rated voltage to earth : 1000 V AC rms (insulated wire)

Core jaw dia. : f 254 mm (10 inch)

Power supply : LR03 (AAA) × 4, continuous use 7 days, or AC ADAPTER 9445-02/ 9445-03

Dimensions and mass : Sensor: 910 mm (35.83 in) length, Control unit: 57.5 mm (2.26 in) W × 86.5 mm (3.41 in) H × 30 mm (1.18 in) D, 450 g (15.9 oz), Cord length from sensor to unit: 2m (6.56 ft), Output cord 1 m (3.28 ft)

Accessories : LR03 (AAA) alkaline batteries × 4

HIOKI 3280-10 Clamp-On HiTester Easy clamping in narrow locations with 16 mm slim body Model 3280-10: Display about nearest basic wave element of harmonic wave by average rectified. Model...
HIOKI 9660 Clamp-On Sensor Clamp-on Sensors for the POWER QUALITY ANALYZER 3196 and CLAMP ON POWER HiTESTER 3169 For input up to AC 500A, select our Model 9661, and for smaller curren...
HIOKI 9695-03 Clamp-On Sensor 100A AC rated current, f15mm (0.59in), Requires the Connection Cord 9219 Key Features • 40 Hz to 5 kHz bandwidth • Phase: 45 Hz to 5 kHz • Rated 100A...
HIOKI 3282 Digital Clamp-On HiTester The true RMS is shown in the distorted waveform You can choice two models, measurement current up to 600A or 1000A. AC current, Voltage, Frequency, Re...
FLUKE 321 Clamp Meter The Fluke 321 and 322 are designed to verify the presence of load current, AC voltage and continuity of circuits, switches, fuses and contacts. These small and rugge...